One of my favorite parts of being a fiber artist is that it gives me permission to play. Rearranging colorful squares of fabric, printing and painting on fabric--they all lighten my mood and bring out the kid in me.
While taping "Quilting Arts TV" Season 14, I saw artists create with lots of playful techniques. But I had the most fun watching Cheryl Sleboda demonstrate how to paint on fabric using ink and shaving cream.
This fabric marbling technique is so easy (and low-cost) you could do it with your kids, and you'd all have a blast for very little money.
Marbling Fabric with Shaving Cream
|Marbled fabric painting designs made with shaving cream
and ink, enhanced with stitching. By Cheryl Sleboda.
By Cheryl Sleboda
Materials needed: Acrylic ink, fabric pieces prepared for dyeing (purchased as PFD or washed),unscented shaving cream (not gel), a shallow pan or tray, eye droppers or pipettes, supplies to protect yourself and your work area from the ink, and a tub of water.
1. Cut the fabric pieces to a size slightly smaller than the tray or pan.
2. Prepare your work surface and put on your painting clothes or an apron.
3. Squeeze out a 1" layer of shaving cream in the tray. Use a straight edge, like a ruler, to smooth the shaving cream flat. Rinse and dry the ruler and set it aside.
4. Drop bits of ink onto the shaving cream with the dropper or pipette. Use as many colors as you like. With a skewer or stick, swirl the drops through the shaving cream until you get the desired marbling effect.
5. With two hands, hold the fabric just above the shaving cream tray. Bring your hands together, lowering the center of the fabric to the center of the tray, making a U with the fabric.
6. Gently place the bottom of the U on the surface and lower the rest of the fabric with your hands so that the entire piece of fabric is flat on the shaving cream. The ink should immediately draw up into the fabric.
7. Holding on to 1 edge of the fabric, pull the print off of the shaving cream and set it aside for a few minutes. With the ruler, scrape off the excess shaving cream from the fabric.
8. Once the print is dry, heat set it. The effects are going to be lighter on the dry fabric than they are when wet.
9. To begin another print, scrape some of the old ink off of the shaving cream, adding more shaving cream, if desired, and repeat the process.
You can learn more about how Cheryl uses this technique--plus how she creates a tie-dye effect with permanent markers, on "Quilting Arts TV" Series 1400, now available on DVD and video download.
P.S. Do you have a favorite art technique that makes you feel like a kid? Do you associate art-making with play? Leave your comments below.