Today's post is a tutorial on matching plaids by Katrina Loving, project editor of Stitch.
Okay, so have you ever found a beautiful, gorgeous, perfect
plaid fabric, but then shied away from using it because you'll have to match
the pattern? I know that this can seem intimidating, but it's not difficult if
you take the time to follow a few simple steps...I promise!
In this tutorial, I'll illustrate how I recently matched a
plaid for a ¾-circle skirt. I chose a simple silhouette that would only require
matching the plaid on the side seams. It's a good idea to choose a simple
garment like this when you're starting out with matching and sewing plaid so
you can practice before moving onto more complex patterns. Give yourself a
chance to get comfortable with this process so you'll be less frustrated and
more willing to try it again.
Steps for matching
Step 1. Lay
your fabric out flat (not doubled) and make sure that the bars on the plaid are
lying straight. Find a prominent bar on the plaid for matching to the center of
the garment (in this case, to the center front and center back of the skirt).
Because my pattern is so large, I had to place the prominent bar of my plaid
slightly off center to fit the pattern piece onto the fabric. In Figure 1 you can see that I placed the Front
Skirt onto the plaid and then lined up the exact center (marked by the
grainline) along one vertical bar of the plaid. I placed a piece of yarn on top
of the pattern to illustrate how I lined up the center of the pattern piece
along the same bar from top to bottom.
Step 2. After
pinning the pattern piece in place, I used purple and black colored pencils (to
match the plaid colors) and a clear gridded ruler to draw a portion of the
plaid onto the pattern piece at each side seam. I used the ruler to help me
keep my drawn lines straight and lined up with the bars on the plaid (Figure 2).
Step 3. After
tracing and cutting the Front Skirt, I transferred the drawn plaid onto the
Back Skirt pattern piece. You can do this by placing the pattern pieces right
sides together (as they will be sewn) and matching up the adjoining edges. Use
a window or light table to trace the plaid onto the new pattern piece (if you
are using pattern tissue, the lines will probably show through without a light
Step 4. I
repeated Step 1 to place the Back Skirt pattern piece on the paid, but this
time, I also used the drawn plaid at the side seams to match up the bars on the
plaid where the front and back of the skirt will be sewn together (Figure 3).
Step 5. After
tracing the Back Skirt, I placed the Front Skirt piece on top (in this case,
with wrong sides together) to check that the plaid matches at the side seams.
If adjustments need to be made, now is the time to make them -- before
cutting! I checked again after cutting the Back Skirt (just to make sure) by
placing the Front and Back right sides together. Figure 4 shows one piece peeled back at the side seam to illustrate
that the plaid does indeed match up.
Step 6. I
pinned the Front and Back pieces, right sides together, along the side seams,
checking that the bars matched up as I went. It was especially important to
check on this skirt because the shape of the skirt means that the side seams
are on the bias and therefore prone to stretching. Figure 5 shows one side
seam that has been sewn -- and
the plaid matches! Now that I have successfully matched a plaid, I think my
next plaid skirt will be on the bias. Wish me luck!
For more tips on working with plaid, see
Sewing Perfect Plaids on page 59 of the Fall 2010 issue of Stitch. Then, try
your hand at one of the Modern Plaid projects (photos page 52 through 58 in the magazine).
Jil Cappuccio's Boy's Cozy Pullover is one of the plaid projects you'll find in Stitch Fall 2010.